• thermblock
    • How It Works
    • Performance Record
    • FAQ

Insulation Performance and Efficiency

[Measurement of temperatures in sealed box testing
method]

In order to maintain the validity of the test, temperature
probes were set on both inside and outside of the galvanized
metal plate that is coated with ThermBlock (painted inside). A
heating element was then placed inside the box; temperature
of probes were tracked in fixed time intervals. (Specified by 2004/8 Japan Paint Inspection
and Testing Association Foundation)

This test clearly shows that the ThermBlock maintains the temperature difference of more than 45°F.

Temperature Comparison by Thermographic Images

ThermBlock was applied to the left side of the standing seam metal roof surface. The thermographic images below were taken from the exterior and interior of the building to compare the temperature difference.

  • Surface Temperature (Exterior)
    Difference: 50.3°C (90.5°F)
  • Surface Temperature (Interior)
    Difference: 7.1°C (12.8°F)

Measured Effectiveness of ThermBlock

Versatile ThermBlock works well in both hot and cold climate by blocking the heat transfer. The following pictures and charts depict the measured effectiveness of ThermBlock in real life applications in two completely opposite climate areas and seasons. In both cases, tremendous savings in energy bill have occurred.

ThermBlock was applied on the rooftop of the warehouse. The temperature of the outdoor surface and the indoor ambient were monitored before and after the application.

Indoor air temperature dropped by 4.5°C (8.1°F)

In two identical units of an apartment with the same temperature setting, ThermBlock was applied to the interior wall of one unit, and the indoor room temperature and number of activation of thermostats was monitored.

Heating energy cost was reduced by 50%

Temperature Measurement with ThermBlock Application

Results of temperature measurement with application of ThermBlcok (0.4mm of thickness) on concrete slab (50 mm.)

  • When ThermBlock was applied on the heat source side of the concrete slab.
  • The table in the right clearly shows that ThermBlock has the insulation effect of keeping the temperature 32.2 to 38.4° F lower.
  • When ThermBlock was applied on the other side of the heat source.
  • The table in the right clearly shows that ThermBlock has the insulation effect of keeping the temperature about up to 39.6° F lower.

For Additional Performance and Application Records ;

 [Click Here]